Scuba Diving History – How Scuba Evolved Over the Years

Man has always held the fascination of the underwater world. The wish to spend some time in the depths of the seas and oceans had captured man’s attention. This inspired him to come up with ways and means which will enable him to explore the marine world.

Many inventors were keen to develop equipment assisting underwater exploration. Ideas and equipment developed during the 1500’s leaned towards a diving bell. This equipment was basically a bell-shaped apparatus with the bottom open to the sea. The first diving bells were large and heavy weighted to sink in a vertical position, therefore trapping enough air to allow a diver to breathe.

So let us start with the chronological events on the history of scuba diving.

The first recorded reference to an actual practical diving bell was made in 1531. However, it was within the late 1600’s that great strides were made in this technology. This meant that now divers were able to spend hours underwater.

In 1690, an English astronomer named Edmund Halley developed a diving bell in which replenished air was sent to the divers by sending weighted barrels of air down from the surface.

The next evolution in the history of scuba diving was the deep sea diving suits, which at that time were referred to as the diving dress.

In 1715, an Englishman by the name of John Lethbridge developed what was to be the first diving dress. This was basically a barrel covered in leather equipped with two arm holes with water tight sleeves and a glass porthole enabling the diver to view underwater. This apparatus was lowered from a ship just the same as a diving bell.

Although several designs were used in later years, this gear still had the same limitations as the diving bell because the diver was restricted in his movements.

In 1828, John and Charles Deane developed the first revolutionary diving dress and heavy helmet which originated from helmets used by firefighters. The helmet rested on the diver’s shoulders, held in place by its own weight and straps to a waist belt. This helmet was connected to a hose that ran to the surface and supplied the diver with constant fresh air. 

An interesting fact in the history of scuba diving is that in 1836, the Deanes issued a diver’s manual, which may be the first of its kind to ever be produced.

Although there were great advancements, the equipment developed by these pioneer inventors were limited in the fact that the diver still had to be attached to the surface via air hose thus restricting movement. The only way forward was for the diver to carry a portable self contained air supply. However during the 19th Century, the cylinders were not strong enough to hold air at high pressure.

An important fact in the history of scuba diving is the invention of the first scuba regulator which was developed by Benoit Rouquayrol. The regulator will later become the main piece of scuba equipment responsible for regulating the flow of air from the tank to meet the diver’s breathing and pressure requirements.

For the full article, visit under the scuba diving section of the site at

Copyright (c) 2010 All rights reserved.

Immobilienmakler Heidelberg

Makler Heidelberg

Source by Kris Mifsud

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.